Dewatering Pumps

Electric Submersible Dewatering Pumps ( AK-1-5150-2P )

KPR'S dewatering submersible pumps, known for job site dependability. Pumps are constructed of strong die cast aluminum and stainless steel body parts; they are fitted with stainless steel hardened impellers and field adjustable nitrile rubber diffuser. The both upper and lower mechanical seals are wholly enclosed in oil chamber. These tough pumps do not have to be totally submerged and will operate under snore conditions if necessary.  

Electric Submersible Dewatering Pumps

Model No. : AK-1.5150-2P
Motor Rating:
1.5HP (1.1KW)/1Ø/50Hz/215Volt, 2800 RPM DOL
Start squirrel cage continuous rated induction
motor, insulation Class H (1800C).

Full Load Current:
9 Amps @ 215 Volt/1Ø/50Hz Ac Supply

Start/Stop: Max.15 per hour.

Discharge Connection:
2” Hose type.

Power Cable:
15 meter, Water proof EPR insulated, flexible power cable of size 4 Core X 1.5 sq.mm.
*Use rated current when sizing control equipment.

Mechanical Seal :
Double seals of Inner lip seal & Outer Tungsten Carbide Vs Tungsten Carbide and are wholly enclosed in oil chamber.

Materials:
Casted Parts : Aluminum Alloy LM4
Outer Casing : Stainless Steel SS304
Motor Casing : Aluminum Alloy LM4
Motor Shaft : Stainless Steel SS431
Impeller : Stainless Steel SS410,
Hardened (HRC-55)
Fasteners : Stainless Steel
Oil Chamber : Aluminum Alloy
Diffuser : Nitrile Rubber Coated
Strainer : Stainless Steel with circular holes of 6mm X 6mm.

Limitations:
Max. Submergence depth-10 Mtr.
Max. Liquid Temperature-40C.
External control panel is mandatory for Single Phase pump.

Weight: 17 KG (Approx) without Cable


Yes, I am Interested !

Electric Submersible Dewatering Pumps ( AK-1.5350-2P )

KPR'S dewatering submersible pumps, known for job site dependability. Pumps are constructed of strong die cast aluminum and stainless steel body parts; they are fitted with stainless steel hardened impellers and field adjustable nitrile rubber diffuser. The both upper and lower mechanical seals are wholly enclosed in oil chamber. These tough pumps do not have to be totally submerged and will operate under snore conditions if necessary.

Electric Submersible Dewatering Pumps

Model No. : AK-1.5350-2P

Motor Rating:
1.5HP (1.1KW)/3Ø/50Hz/415Volt, 2800 RPM DOL Start squirrel cage continuous rated induction
motor, insulation Class H (1800C).

Full Load Current:
4 Amps @ 415 Volt/3Ø/50Hz Ac Supply Start/Stop: Max.15 per hour.

Discharge Connection:
2” SS304, Hose type.

Power Cable:
15 meter, Water proof EPR insulated, flexible power cable of size 4 Core X 1.5 sq.mm.
*Use rated current when sizing control equipment.

Mechanical Seal :
Double seals of Inner lip seal & Outer Tungsten Carbide Vs Tungsten Carbide and are wholly
enclosed in oil chamber.

Materials:
Casted Parts : Aluminum Alloy LM4
Outer Casing : Stainless Steel SS304
Motor Casing : Aluminum Alloy LM4
Motor Shaft : Stainless Steel SS431
Impeller : Stainless Steel SS410,
Hardened (HRC-55)
Fasteners : Stainless Steel
Oil Chamber : Aluminum Alloy
Diffuser : Nitrile Rubber Coated
Strainer : Stainless Steel with circular holes of 6mm X 6mm.

Limitations: 
Max. Submergence depth-10 Mtr.
Max. Liquid Temperature-40C.
These pumps must be used with external motor protection in accordance with technical data.

Weight: 17 KG (Approx) without Cable


Yes, I am Interested !

Electric Submersible Dewatering Pumps ( AK-1.5360-2P )

KPR'S dewatering submersible pumps, known for job site dependability. Pumps are constructed of strong die cast aluminum and stainless steel body parts; they are fitted with stainless steel hardened impellers and field adjustable nitrile rubber diffuser. The both upper and lower mechanical seals are wholly enclosed in oil chamber. These tough pumps do not have to be totally submerged and will operate under snore conditions if necessary.

Electric Submersible Dewatering Pumps

Model No. : AK-1.5360-2P

Motor Rating:
1.5HP (1.1KW)/1Ø/60Hz/110Volt, 3600 RPM DOL Start squirrel cage continuous rated induction
motor, insulation Class H (1800C).

Full Load Current: 11.2 Amps @ 110 Volt/1Ø/60Hz Ac Supply

Discharge Connection: 2” SS304, Hose type.

Start/Stop: Max.15 per hour.

Power Cable:
15 meter, Water proof EPR insulated, flexible power cable of size 4 Core X 1.5 sq.mm.
*Use rated current when sizing control equipment.

Mechanical Seal :
Double seals of Inner lip seal & Outer Tungsten Carbide Vs Tungsten Carbide and are wholly
enclosed in oil chamber.

Materials:
Casted Parts : Aluminum Alloy LM4
Outer Casing : Stainless Steel SS304
Motor Casing : Aluminum Alloy LM4
Motor Shaft : Stainless Steel SS431
Impeller : Stainless Steel SS410,
Hardened (HRC-55)
Fasteners : Stainless Steel
Oil Chamber : Aluminum Alloy
Diffuser : Nitrile Rubber Coated
Strainer : Stainless Steel with circular holes of 6mm X 6mm.

Limitations: 
Max. Submergence depth-10 Mtr.
Max. Liquid Temperature-40C.
These pumps must be used with external motor protection in accordance with technical data.

Weight: 17 KG (Approx) without Cable


Yes, I am Interested !

Electric Submersible Dewatering Pumps ( AK-2350-2P )

KPR`S dewatering submersible pumps, known for job site dependability. Pumps are constructed of strong die cast aluminum and stainless steel body parts; they are fitted with stainless steel hardened impellers and field adjustable nitrile rubber diffuser. The both upper and lower mechanical seals are wholly enclosed in oil chamber. These tough pumps do not have to be totally submerged and will operate under snore conditions if necessary.

Electric Submersible Dewatering Pumps

Model No. : AK-2350-2P

Motor Rating: 2HP (1.5KW)/3Ø/50Hz/415Volt, 2800 RPM DOL Start squirrel cage continuous rated induction
motor, insulation Class H (1800C).

Full Load Current: 5 Amps @ 415 Volt/3Ø/50Hz Ac Supply

Discharge Connection: 2”Stainless Steel, Hose type.

Start/Stop: Max.15 per hour.

Power Cable: 15 meter, Water proof EPR insulated, flexible power cable of size 4 Core X 1.5 sq.mm.
*Use rated current when sizing control equipment

Mechanical Seal : Double seals of Inner Car/Cer & Outer Tungsten Carbide Vs Tungsten Carbide and are wholly
enclosed in oil chamber.

Materials:
Casted Parts : Aluminum Alloy LM4
Outer Casing : Stainless Steel SS304
Motor Casing : Aluminum Alloy LM4
Motor Shaft : Stainless Steel SS431
Impeller : Stainless Steel 410, Hardened (HRC-55)
Fasteners : Stainless Steel SS304
Oil Chamber : Aluminum Alloy LM4
Diffuser : Nitrile Rubber Coated
Strainer : Stainless Steel SS304 with circular holes of 6mm X 6mm.

Limitations: 

  • Max. Submergence depth-10 Mtr.

  • Max. Liquid Temperature-40C.

*These pumps must be used with external motor protection in accordance with technical data.

Weight: 19 KG (Approx) without Cable


Yes, I am Interested !

Electric Submersible Dewatering Pumps ( AK-3350-2P )

KPR'S dewatering submersible pumps, known for job site dependability. Pumps are constructed of strong die cast aluminum and 304 stainless steel body parts; they are fitted with stainless steel hardened impellers and field adjustable nitrile rubber diffuser. The both upper and lower mechanical seals are wholly enclosed in oil chamber. These tough pumps do not have to be totally submerged and will operate under snore conditions if necessary.

Electric Submersible Dewatering Pumps

Model No. : AK-3350-2P

Motor Rating: 3HP (2.2KW)/3Ø/50Hz/415Volt, 2850 RPM DOL Start squirrel cage continuous rated induction
motor, insulation Class H (1800C).
Also Available in Single Phase 220 Volt.

Full Load Current: 5 Amps @ 415 Volt/3Ø/50Hz Ac Supply

Discharge Connection: 3” SS Outlet, Hose type.

Start/Stop: Max.15 per hour.

Power Cable: 15 meter, Water proof EPR insulated, flexible power cable of size 4 Core X 2.5 sq.mm.
*Use rated current when sizing control equipment.

Mechanical Seal : Double seals of Inner & Outer Tungsten Carbide Vs Tungsten Carbide and are wholly
enclosed in oil chamber.

Materials:
Casted Parts : Aluminum Alloy LM4
Outer Casing : Stainless Steel 304
Motor Casing : Aluminum Alloy LM4
Motor Shaft : Stainless Steel 431
Impeller : Stainless Steel 410,
Hardened (HRC-55)
Fasteners : Stainless Steel 304
Oil Chamber : Aluminum Alloy LM4
Diffuser : Nitrile Rubber/Aluminum Alloy
Strainer : Stainless Steel with circular holes of 6mm X 6mm.

Limitations: 

  • Max. Submergence depth-10 Mtr.

  • Min. Submergence depth – 6” Inch.

  • Max. Liquid Temperature-40C.


*These pumps must be used with external motor protection in accordance with technical data.

Weight: 35 KG (Approx) without Cable


Yes, I am Interested !

Electric Submersible Dewatering Pumps ( AK-6350-2P )

KPR'S dewatering submersible pumps, known for job site dependability. Pumps are constructed of strong die cast aluminum and stainless steel body parts; they are fitted with stainless steel hardened impellers and field adjustable nitrile rubber diffuser. The both upper and lower mechanical seals are wholly enclosed in stainless steel oil chamber. These tough pumps do not have to be totally submerged and will operate under snore conditions if necessary.

Electric Submersible Dewatering Pumps

Model No. : AK-6350M\L-2P
Motor Rating: 6HP (4.5KW)/3Ø/50Hz/415Volt, 2850 RPM DOL Start squirrel cage continuous rated induction
motor, insulation Class H (1800C).

Full Load Current: 9.8 Amps @ 415 Volt/3Ø/50Hz Ac Supply

Discharge Connection: 3”Stainless Steel, Hose type.

Start/Stop: Max.15 per hour.

Power Cable: 15 meter, Water proof PVC/EPR insulated, flexible power cable of size 4 Core X 2.5 sq.mm.
*Use rated current when sizing control equipment.

Mechanical Seal : Double mechanical seals (Inner & Outer) in Tandem arrangement. Seal faces are Tungsten
Carbide Vs Tungsten Carbide and are wholly enclosed in oil chamber.

Materials:
Casted Parts : Aluminum Alloy LM4
Outer Casing : Stainless Steel-304
Motor Casing : Aluminum Alloy LM4
Motor Shaft : Stainless Steel-431
Impeller : Stainless Steel 410,
Hardened (HRC-55)
Fasteners : Stainless Steel-304
Oil Chamber : Aluminum Alloy LM4
Diffuser : Nitrile Rubber Coated
Strainer : Stainless Steel with circular holes of 10mm X 10mm.

Limitations: 
Max. Submergence depth-10 Mtr.
Max. Liquid Temperature-40C.

*These pumps must be used with external motor protection in accordance with technical data.

Weight: 45 KG (Approx) without Cable


Yes, I am Interested !

Electric Submersible Dewatering Pumps ( AK-8350-2P )

KPR'S dewatering submersible pumps, known for job site dependability. Pumps are constructed of strong die cast aluminum and stainless steel body parts; they are fitted with stainless steel hardened impellers and field adjustable nitrile rubber diffuser. The both upper and lower mechanical seals are wholly enclosed in stainless steel oil chamber. These tough pumps do not have to be totally submerged and will operate under snore conditions if necessary.

Electric Submersible Dewatering Pumps

Model No. : AK-8350-2P

Motor Rating: 8HP (6KW)/3Ø/50Hz/415Volt, 2850 RPM DOL Start squirrel cage continuous rated induction
motor, insulation Class H (1800C).

Full Load Current: 13 Amps @ 415 Volt/3Ø/50Hz Ac Supply

Discharge Connection: 4” Stainless Steel, Hose type.

Start/Stop: Max.15 per hour.

Power Cable: 15 meter, Water proof EPR insulated, flexible power cable of size 4 Core X 4 sq.mm.
*Use rated current when sizing control equipment.

Mechanical Seal :
Double mechanical seals (Inner & Outer) in Tandem arrangement. Seal faces are Tungsten Carbide Vs Tungsten Carbide and are wholly enclosed in oil chamber.

Materials:
Casted Parts : Aluminum Alloy LM4
Outer Casing : Stainless Steel 304
Motor Casing : Aluminum Alloy LM4
Motor Shaft : Stainless Steel 431
Impeller : Stainless Steel 410,
Hardened (HRC-55)
Fasteners : Stainless Steel 304
Diffuser : Nitrile Rubber Coated
Strainer : Stainless Steel with circular holes of 10mm X 10mm.

Limitations: 
Max. Submergence depth-15 Mtr.
Max. Liquid Temperature-40C.
These pumps must be used with external motor protection in accordance with technical data.

Weight: 57 KG (Approx) without Cable


Yes, I am Interested !

Electric Submersible Dewatering Pumps ( AK-8350h-2P )

KPR'S dewatering submersible pumps, known for job site dependability. Pumps are constructed of strong die cast aluminum and stainless steel body parts; they are fitted with stainless steel hardened impellers and field adjustable nitrile rubber diffuser. The both upper and lower mechanical seals are wholly enclosed in oil chamber. These tough pumps do not have to be totally submerged and will operate under snore conditions if necessary.

Electric Submersible Dewatering Pumps

Model No. : AK-8350H-2P

Motor Rating:
8HP (6KW)/3Ø/50Hz/400Volt, 2850 RPM DOL Start squirrel cage continuous rated induction
motor, insulation Class H (1800C).

Full Load Current: 13 Amps @ 400 Volt/3Ø/50Hz Ac Supply

Discharge Connection: 3” Stainless Steel, Hose type.

Start/Stop: Max.15 per hour.

Power Cable: 15 meter, Water proof PVC insulated, flexible power cable of size 4 Core X 4 sq.mm.
*Use rated current when sizing control equipment.

Mechanical Seal : Double mechanical seals (Inner & Outer) in Tandem arrangement. Seal faces are Tungsten Carbide Vs Tungsten Carbide and are wholly enclosed in oil chamber.

Materials: Casted Parts : Aluminum Alloy LM4
Outer Casing : Stainless Steel 304
Motor Casing : Aluminum Alloy LM4
Motor Shaft : Stainless Steel 431
Impeller : Stainless Steel 410,
Hardened (HRC-55)
Fasteners : Stainless Steel 304
Diffuser : Nitrile Rubber Coated
Strainer : Stainless Steel with circular holes of 10mm X 10mm.

Limitations: 

  • Max. Submergence depth-15 Mtr.
  • Max. Liquid Temperature-40C.

These pumps must be used with external motor protection in accordance with technical data.

Weight: 67 KG (Approx) without Cable


Yes, I am Interested !

Electric Submersible Dewatering Pumps ( AK-10350-2P )

KPR'S dewatering submersible pumps, known for job site dependability. Pumps are constructed of strong die cast aluminum and stainless steel body parts; they are fitted with stainless steel hardened impellers and field adjustable nitrile rubber diffuser. The both upper and lower mechanical seals are wholly enclosed in stainless steel oil chamber. These tough pumps do not have to be totally submerged and will operate under snore conditions if necessary.

 

Electric Submersible Dewatering Pumps

Model No. : AK-10350-2P

Motor Rating: 10HP (7.5KW)/3Ø/50Hz/415Volt, 2850 RPM DOL Start squirrel cage continuous rated induction
motor, insulation Class H (1800C).

Full Load Current: 16 Amps @ 415 Volt/3Ø/50Hz Ac Supply

Discharge Connection: 4” Stainless Steel, Hose type.

Start/Stop: Max.15 per hour.

Power Cable: 15 meter, Water proof EPR insulated, flexible power cable of size 4 Core X 4 sq.mm.
*Use rated current when sizing control equipment.

Mechanical Seal : Double mechanical seals (Inner & Outer) in Tandem arrangement. Seal faces are Tungsten
Carbide Vs Tungsten Carbide and are wholly enclosed in oil chamber.

Materials:
Casted Parts : Aluminum Alloy LM4
Outer Casing : Stainless Steel 304
Motor Casing : Aluminum Alloy LM4
Motor Shaft : Stainless Steel 431
Impeller : Stainless Steel 410,
Hardened (HRC-55)
Fasteners : Stainless Steel 304
Diffuser : Nitrile Rubber Coated
Strainer : Stainless Steel with circular holes of 10mm X 10mm.

Limitations: 

  • Max. Submergence depth-15 Mtr.
  • Max. Liquid Temperature-40C.

*These pumps must be used with external motor protection in accordance with technical data.


Weight: 65.5 KG (Approx) without Cable


Yes, I am Interested !

Electric Submersible Dewatering Pumps ( AK-15350-2P )

KPR'S dewatering submersible pumps, known for job site dependability. Pumps are constructed of strong die cast aluminum and stainless steel body parts; they are fitted with stainless steel hardened impellers and field adjustable nitrile rubber diffuser. The both upper and lower mechanical seals are wholly enclosed in oil chamber. These tough pumps do not have to be totally submerged and will operate under snore conditions if necessary.

Electric Submersible Dewatering Pumps

Model No. : AK-15350M/L-2P

Motor Rating: 15HP (11.2KW)/3Ø/50Hz/415Volt, 2850 RPM DOL Start squirrel cage continuous rated
Induction motor, insulation Class H (1800C).

Full Load Current: 24 Amps @ 415 Volt/3Ø/50Hz Ac Supply

Discharge Connection: 4”/6” Aluminum Alloy, Hose type.

Start/Stop: Max.15 per hour.

Power Cable:
15 meter, Water proof EPR insulated, flexible power cable of size 4 Core X 4 sq.mm.
*Use rated current when sizing control equipment.

Mechanical Seal :
Double mechanical seals (Inner & Outer) in Tandem arrangement. Seal faces are Tungsten Carbide Vs Tungsten Carbide and are wholly enclosed in oil chamber.

Materials:
Casted Parts : Aluminum Alloy LM4
Outer Casing : Stainless Steel 304
Motor Casing : Aluminum Alloy LM4
Motor Shaft : Stainless Steel 431
Impeller : Stainless Steel 410,
Hardened (HRC-55)
Fasteners : Stainless Steel 304
Diffuser : Nitrile Rubber Coated
Strainer : Stainless Steel with circular holes of 20mm.

Limitations: 

  • Max. Submergence depth-15 Mtr.
  • Max. Liquid Temperature-40C.

*These pumps must be used with external motor protection in accordance with technical data.

Weight: 130 KG (Approx) without Cable

 


Yes, I am Interested !

Electric Submersible Dewatering Pumps ( AK-35350m-L-2P )

KPR'S dewatering submersible pumps, known for job site dependability. Pumps are constructed of strong die cast aluminum and stainless steel body parts; they are fitted with stainless steel hardened impellers and field adjustable nitrile rubber diffuser. The both upper and lower mechanical seals are wholly enclosed in oil chamber. These tough pumps do not have to be totally submerged and will operate under snore conditions if necessary.

Electric Submersible Dewatering Pumps

Model No. : AK-35350m-L-2P
Motor Rating: 35HP (26.11KW)/3Ø/50Hz/415Volt, 2800 RPM
DOL Start squirrel cage continuous rated induction motor, insulation Class H (1800C).

 

Full Load Current: 46 Amps @ 415 Volt/3Ø/50Hz Ac Supply

Discharge Connection: 6”/8” Aluminum, Hose type.

Start/Stop: Max.15 per hour.

Power Cable: 15 meter, Water proof PVC insulated, flexible power cable of size 4 Core X 10 sq.mm.
*Use rated current when sizing control equipment.

Mechanical Seal : Double seals of Inner lip seal & Outer Tungsten Carbide Vs Tungsten Carbide and are wholly
enclosed in oil chamber.

Materials:
Casted Parts : Aluminum Alloy LM4
Outer Casing : Stainless Steel 304
Motor Casing : Aluminum Alloy LM4
Motor Shaft : Stainless Steel 431
Impeller : Stainless Steel 410,
Hardened (HRC-55)
Fasteners : Stainless Steel 304
Oil Chamber : Aluminum Alloy LM4
Diffuser : Nitrile Rubber Coated
Strainer : Stainless Steel with circular holes of 12mm X 12mm.

Limitations: 

  • Max. Submergence depth-10 Mtr.

  • Max. Liquid Temperature-40C.

*These pumps must be used with external motor protection in accordance with technical data.


Weight: 205 KG (Approx) without Cable

 

Yes, I am Interested !

Electric Submersible Small Serie ( AK-Small-series)

KPR`S dewatering submersible pumps, known for job site dependability. Pumps are constructed of strong die cast aluminum and stainless steel body parts;

Electric Submersible Dewatering Pumps

APPLICATIONS: 

  •  Designed for residential, commercial and industrial application where sewage, effluent discharge and storm water drainage are essential.

  • Effectively drains sumps, basements and construction sites

  • Rapidly dewaters swimming pools, spas, hot tubs tanks and other water storage structures.

  • Ideal for water fountains, sprinkler systems, aquariums and irrigation.

  • Quit & efficient way to transfer water from ground level to overhead tanks in house and bungalows

 

ITEM

1"

AK-0.5 Series

Pumping Fluid Cleaning water, muddy water, sump water
40' C-
Pump Material Polycorbonate
Silicon Carbide
SKF Upper & Lower
Aluminum Alloy LM-4
Aluminum Alloy LM-4
Motor Dry type, induction motor, 2-poles
Class F
Single Phase/115V/60Hz
SS 410
 
3mtr. PVC insulated with 3pin plug
Discharge Connection 1" NPT Threading type

 

Model HP PH Voltage Total Head (Max) ft Capacity (Max) gal/min Rated Current Amp Starting Method Float Total Hight Wt.
AK-0.3-2P 0.3 Single 115V 24' 52 6 Capacitor Incl 297mm 8Kg
AK-0.5-2P 0.5 Single 115V 33' 59 7 Capacitor Incl 312mm

Yes, I am Interested !

Technical Specification

High Performance Submersible Motors:

All KPR' S dewatering pumps are equipped with a heavy duty class 'F' insulated submersible motor with shrink fitted stator for exceptional heat transfer, keeping the motor cool even under snore or partial submergence conditions. Motor windings are dipped & baked three times in high temperature class 'H' insulating varnish for extended protection against. burnout & moisture penetration. The entire motor operates in air, reducing motor drag while eliminating the possibility of environmental contaminations.

Corrosion:

corrosion

All KPR' S impellers are design to keep working under extremely harsh conditions. They are produced in stainless steel 410 grade and machined in our own machine shop to exacting specifications and finished to very high hardness levels. Hardness reduces

Heavy Duty Castings For Last Long

Heavy Duty Casting

All KPR' S pump models are constructed of strong die cast aluminum top cover & bottom cover with sand blasted and epoxy coated for last long.

Long Life Seals:

All models use an exclusive dual tandem, double mechanical seal system, with each set mechanically independent, for added protection against water intrusion. Seal faces are tungsten carbide. for maximum resistance to corrosion, abrasion & thermal shock. The seals are operated in a stainless steel chamber filled with 
lubricating oil.

Wear Resistant Steel Oil Chamber:

Wear Resistant Steel Oil Chamber

All KPR' S pumps are equipped with constructed of strong investment cast stainless steel seal housing for continues seal lubrication and long life.

 


Yes, I am Interested !

Our Products

Quick Enquiry

Get In Touch